|
Directions for Use
Dilute 1 part Para Trooper™ to 5 parts water. The water should be heated to 145º to 160º F prior to the dilution process. The higher end of the temperature range is recommended because the liquid solution may start to cool down before it is applied to the paraffin based residue. Apply the heated solution directly to the cargo tank with the paraffin or wax residue. Para Trooper™ is typically applied through a rotating pressure sprayer inserted into the storage tank. Re-circulate until a loose paste is formed, then allow the paste to cool slightly to 100º F. At this temperature, the used Para Trooper™ solution will be water soluble and can be pumped into the ocean. A final rinse with hot water (150º F or more) and a mild detergent will remove the remains of the Para Trooper™ solution.
Properties
Appearance: Colorless liquid
Odor:
Slight solvent odor
Foam: Slight
pH @ 1%: 7.0 – 8.5
Environmental Data: Biodegradable, Paraffin content dictates disposal method
|
